杨, 茂升 QINGDAO XINQUAN PLASTIC MACHINERY CO., LTD - Page 4 of 5

Read more about the article Small diameter hose, medical tube production line

XQ Series Plastic Pipe Production Line

Small diameter hose, medical tube production line

Small diameter hose, medical tube production line This unit is mainly used to produce PVC, PP, PE and other plastic hoses, which can be widely used in medical, chemical, beverage and other industries. Production hose varieties: single tube, single tube with color code, equal-diameter parallel tube, different diameter parallel tube, color-coded parallel tube…. The design of this unit is advanced, the main engine and the marking machine adopt frequency conversion speed regulation, and the extrusion speed is stable. Water level and water temperature control of cooling water tank. Host model: ST-45×25 stainless steel water tank, length 2 meters, with drying device; non-toxic plastic flat belt tractor, power: 0.06kw×2 double station coiler, power: 0.75kw.

2022-2-15

Q Series Plastic and WPC Profiles Production Line

PP, PE, PVC WPC Profile Production Line

PVC profile and PP, PE, PVC WPC profile production line: 1. Product introduction: Using specially designed screw barrel, mold and extruder processing production technology to produce wood plastic products. The extruder can be directly extruded by two-stage mixing in a single machine, or it can be extruded in two steps after granulation, which saves electricity and space, has high output, and has stable extrusion pressure. The residual water in the powder makes the feeding section of the main machine more substantial; the plasticizing and mixing effect is good. The optimized screw design makes the shear small, it is not easy to cut the wood fiber, and the material stays in the machine for a uniform time. The screw barrel is treated with bimetal, which is wear-resistant and corrosion-resistant, and its service life is greatly extended. This production line can produce PE, PP or PVC wood-plastic profiled products. The products are sturdy and durable, and have the advantages of both plastic products and wood products. It not only overcomes the shortcomings of easy deformation of plastic products, but also overcomes wood products that are…

2022-2-15

Q Series Plastic and WPC Profiles Production Line

PVC Door and Window Profile Extrusion Line

PVC door and window profile production line 1. About the device The PVC door and window profile production line mainly uses PVC and UPVC as raw materials to produce various plastic door and window profiles and decorative profiles. The main engine and the traction device are all equipped with frequency conversion speed control controller, which can realize the stepless speed regulation of the whole line; the vacuum forming table adopts the water circulation type sealed energy-saving vacuum system, and is equipped with centralized water supply and quick-change joints, which can realize the easy, convenient and fast replacement of different forms of stereotypes. Mold; setting table can choose 4 meters, 6 meters, 8 meters and other specifications; the tractor adopts crawler tractor, which can ensure the stability and non-deformation of the extrusion process of the profile; the automatic film sticking device ensures the surface finish of the extruded product; cutting The device is a synchronous tracking structure, which can ensure that the section of the product is flat and there is no chipping phenomenon. The unit has the characteristics of low energy consumption,…

2022-2-15

Q Series Plastic and WPC Profiles Production Line

PVC, PP, PE, PC ABS and other small profile extrusion line

PVC, PP, PE, PC, ABS and other small profile extrusion lines 1. About the device The company has absorbed advanced technology at home and abroad, and successfully developed a small production line suitable for users' needs. The unit is composed of a single screw extruder, a vacuum setting table, a traction machine, a cutting machine, a turning frame, etc. The production line has the remarkable characteristics of good plasticization, high output and low energy consumption. The host adopts imported AC inverter for speed regulation, and the temperature control instrument adopts Japanese RKC or OMRON products. Auxiliary vacuum pump and traction motor are made of high-quality products and easy to maintain. 2. Main technical parameters model XQ50 XQ108 XQ180 Maximum product width (mm) 50 108 180 Host model SJZ 45/100 SJZ 45/100 SJZ 55/110 Total power (kw) 18 26.1 31.6 Cooling water consumption (m3/h) 5 5 7 Compressed air consumption (m3/min) 0.5 0.6 0.6

2022-2-15

Q Series Plastic and WPC Profiles Production Line

PVC ceiling gusset profile equipment

PVC gusset profile production line About the device The PVC gusset profile production line mainly uses PVC and UPVC as raw materials to produce ceiling and decorative gusset profiles. The main engine and the traction device are all equipped with frequency conversion speed control controller, which can realize the stepless speed regulation of the whole line; the vacuum forming table adopts the water circulation type sealed energy-saving vacuum system, and is equipped with centralized water supply and quick-change joints, which can realize the easy, convenient and fast replacement of different forms of stereotypes. The tractor adopts a crawler tractor, which can ensure the stability and non-deformation of the extrusion process of the profile; the automatic film sticking device ensures the surface finish of the extruded product; the cutting device is a synchronous tracking structure, which can ensure that the product has a flat section and no collapse. Phenomenon. The unit has the characteristics of low energy consumption, stable performance, high speed and high efficiency. The profile extruded by this unit has beautiful appearance, strong compressive performance, good light stability and thermal stability,…

2022-2-15

Read more about the article CPP Cast Film Production Line

XQ Series Cast Film Production Line

CPP Cast Film Production Line

CPP Cast Film Production Line Product width: 1200-4500mm. Reference output range: 200-1755kg/h. Single linkage of the whole machine. Fully automatic operation of the whole machine can be selected according to customer needs . 1. The screw is designed with special mixing function and high plasticizing capacity, with good plasticization, good mixing effect and high output . Thickness gauge, online automatic detection of film thickness, automatic adjustment of the touch head 3. The cooling forming roller adopts a special spiral flow channel design to ensure good film cooling and forming effect at high speed 4. The film edge material is directly recycled online, greatly reducing production costs 5. Fully automatic center take-up, equipped with imported tension controller, automatic roll change and cutting, very easy to operate.

2022-2-15

Read more about the article CPE Cast Film Production Line

XQ Series Cast Film Production Line

CPE Cast Film Production Line

CPE Cast Film Production Line Main features: Cast CPE film has high transparency, thickness uniformity ≤±3%, longitudinal and transverse tensile strength basically reaches the index of blown film, and production efficiency is greatly improved, which is suitable for high-speed compatibilizer-free compounding and automatic packaging machine requirements. All use melted index MI: 29/10minin raw materials, mainly linear polyethylene and high density polyethylene. Finished product width: 1600-2100mm, 1700-2200mm, 2000-2500mm, 2200-2700mm. Main technical parameters ■Maximum mechanical speed: 200m/min; ■Product thickness: 0.035～0.15mm; ■Thickness error: ≤±4%; ■Product width: 2100mm; ■ winding diameter: 800mm; ■ extrusion capacity: 680kg / h.

2022-2-15

Read more about the article PVDF Cast Film Production Line

XQ Series Cast Film Production Line

PVDF Cast Film Production Line

PVDF cast film production line 1. Maximum width of product: 1070mm 2. Product thickness range: 25-35 microns, conventional 25-28 microns. 3. Maximum mechanical line speed:. Conventional: 25-30m/min 4. Co-extrusion structure: single layer. 5. Raw materials used: vinylidene fluoride. 6. Die head and screw barrel material: Hastelloy steel (optional)

2022-2-15

Read more about the article Calender production line

XQ Series Cast Film Production Line

Calender production line

Plastic Calendering Line This production line is a plastic calendering unit, which can be used by plastic products factories to produce various PVC rigid and semi-rigid plastic sheets, and can also be used to produce high-filled plastic sheets. The five-roll plastic calendering unit is composed of a five-axis calendering machine and a cooling coiling auxiliary machine, and the thickness of the produced products can reach 0.03-0.90mm. The main technical parameters Product thickness (mm) 0.03-0.08mm 0.08-0.90mm Yield (kg/h) 350-700kg/h 700-1300kg/h Main motor power r (KW) 55kw*2sets, 75KW*3 sets, Roller line speed: 0-40m/min Hardened gear box 5 units, transmission accuracy grade 6 constant temperature gas station 5 sets, heating power Calendering auxiliary machine configuration Total power 458KW, heating power 220KW, actual power consumption 350KW/H

2022-2-15

Read more about the article Plastic PP, PE, PET crushing, cleaning and recycling production line

XQ Series Plastic Washing and Pelletizing Production Line

Plastic PP, PE, PET crushing, cleaning and recycling production line

Plastic PP, PE, PET crushing, cleaning and recycling production line The recycling of waste film has always been a difficult point in plastic recycling. Through continuous exploration and practice, XINQUAN has solved the problems of difficult cleaning and dehydration of waste membranes. XQ series PE, PP film crushing, cleaning and recycling production lines fully consider the characteristics of film materials, and design and formulate a targeted recycling plan. After sorting, wet crushing, friction cleaning and other processing processes, the soil and oil stains on the surface of film materials such as agricultural film, packaging film, and handbags are thoroughly cleaned and removed. Recycled products are widely used in blown film, injection extrusion, recycling granulation and other fields.

2022-2-15

Read more about the article PP, PE strands and two-stage pelletizing equipment

XQ Series Plastic Washing and Pelletizing Production Line

PP, PE strands and two-stage pelletizing equipment

PP, PE strands and two-stage pelletizing equipment It consists of a conical forced-feed extruder, a single-screw extruder, a vacuum exhaust device, a quick screen changing device, and a pelletizing device. The diameter of the screw feeding section is increased. The compressor has a larger volumetric compression ratio. The vacuum device at the connection between the two machines can effectively remove the volatile gas from the material. The waste can be directly extruded products. Not only ordinary PP, PE plastics, but also foamed PS, PE, EVA and other products can be recycled. According to different materials, output, equipped with different screw diameters. Special reducer for hard surface; 38CrALAO nitriding material simple screw; exhaust adopts vacuuming method to ensure that particles have no pores; non-stop screen changer; cooling water tank; drying fan; hob type pelletizer. No drying process, normal temperature granulation, one-time molding, less investment, quick effect and good economic benefits.

2022-2-15

Read more about the article PVC and WPC Hot Cut Pelletizing Line

XQ Series Plastic Washing and Pelletizing Production Line

PVC and WPC Hot Cut Pelletizing Line

PVC and WPC Hot Cutting Pelletizing Line The unit is a complete set of pelletizing equipment composed of a series of single-screw extruders, or conical twin-screw machines and corresponding pelletizing auxiliary machines. It is mainly used for raw PVC, WPC (PVC + Wood, PP/PE + Wood) and other plastic granules for various purposes. The produced plastic granules are uniform, dense and beautiful. The unit has good plasticizing effect, uniform mixing and compact structure. The auxiliary machine adopts air-supplied aggregate, vibration separation and cooling, or stainless steel sink for slicing and pelletizing. It has the characteristics of high degree of automation and good production efficiency.

2022-2-15

Read more about the article Parallel twin-screw extrusion granulation unit

XQ Series Plastic Washing and Pelletizing Production Line

Parallel twin-screw extrusion granulation unit

Parallel twin-screw extrusion granulation unit Features: Modification and masterbatch granulation unit is one of the leading products of our company. It adopts single-screw high-efficiency exhaust extruder or parallel co-rotating or counter-rotating twin-screw extruder, which has good plasticizing effect and large output. Modular structure, the structure can be changed according to different raw materials. It is suitable for the modification of PE, PP, PA, ABS, PPS, PC, PET, PMMA and other different materials and masterbatch granulation. The unit consists of a high-speed mixer, a feeding machine, an extruder, a feeding head, a cooling water tank or chain air cooling, an air knife drying system, a pelletizer, a vibrating screen, and an air feeding system. Using water ring grinding surface granulation and underwater thermal granulation.

2022-2-15

Read more about the article Plastic crusher

Auxiliary Machines

Plastic crusher

plastic crusher This series of crushers are mainly used for crushing various plastic plastics and rubbers such as plastic profiles, pipes, rods, threads, films, waste rubber products. The pellets can be directly used for extrusion and injection molding. SWP-450 plastic crusher is an ideal equipment for recycling large profiles and pipes; its crushing capacity is large, its output is high, its working performance is stable, and it is equipped with an automatic feeding machine, which improves the degree of automation of the machine. SWP-630 plastic crusher is a special equipment for crushing large plastic hollow containers, bulk head materials and board materials. Features : The sound insulation device is adopted, so the noise is small; the movable knife adopts a removable blade, which can be removed and sharpened separately after being dull; it is suitable for crushing various soft, hard and foam plastics. The main technical parameters: model Rotary knife diameter (mm) Rotary blade (sheet) (pcs) Fixed blade (piece) (pcs) Sieve plate aperture (mm) Crushing particle size (mm) Crushing capacity (kg) Power (kw) Dimensions (mm ) Machine weight (kg) 100 100 2…

2022-2-15

Read more about the article Pipe Flaring Machine

Auxiliary Machines

Pipe Flaring Machine

Pipe Flaring Machine 1. Introduction of flaring machine: SGK series automatic flaring machine is the equipment for processing PVC plastic hard pipe flaring, models include SGK16-50 double-pipe automatic flaring machine; SGK50-250 automatic flaring machine; -400 automatic flaring machine; SGK315-630 automatic flaring machine; 50-250 semi-automatic flaring machine. This series of flaring machines can be used in line with extruders and auxiliary machines. The flaring forms are divided into two forms: R flaring and straight flaring. They can produce various specifications of water supply and drainage pipes of 0.6Mpa-1.6Mpa. After the tube is formed, it is cooled by strong air or water, and it is not easy to deform. The electrical appliances of the whole machine are controlled by Mitsubishi PLC and Taiwan Weilun touch screen, and there is no need for manual intervention in the production process. 2. Technical parameters: Tube outer diameter Φ50-Φ630 system working pressure 4-6.3Mpa Hydraulic oil No. 46 anti-wear hydraulic oil Maximum heating temperature 300 degrees (℃) compressed air pressure 0.4-0.6Mpa water pressure 0.2-0.3Mpa PLC FX1n-60MR Photoelectric use Autonics Heating pipe Stainless steel with heat sink Mold material…

2022-2-15

Read more about the article Tube Sheet Mould

Auxiliary Machines

Tube Sheet Mould

1. Tube sheet mould Qingdao Xinquan Plastic Machinery Co., Ltd. independently and professionally designs and produces various types of pipe die heads. Specifications ф 20-800mm supply and drainage pipe mold, co-extrusion pipe mold structure: blue type, spiral type, bracket type mold. Mold features: 1. The melt flow speed reaches the expected mechanical uniformity and thermal uniformity. 2. No mandrel support is required, so that the flow pattern that often occurs in production disappears, and the smoothness of the surface of the pipe is guaranteed. 3. Low pressure consumption and high output, the output can reach 80% of the extrusion volume. 4. The structure is compact, the connection is reasonable, and the replacement is convenient. 5. Made with high-quality molds. 2. Plate sheet mould: Our company provides all kinds of plastic sheet and sheet moulds, such as PP, PC hollow lattice sheet moulds, PP, PE, PS, PVC, PET, ABS sheet and sheet moulds; the material is 5CrNiMo special steel for moulds or imported steel. All hard chrome plated, fasteners are made of 12.9 grade high-strength bolts, and high-quality, durable stainless steel heating…

2022-2-15